[Healeys] Turn signals

[Oudesluys]

Make bloody sure that all earth connections are prestine. LED bulbs are 
very sensitive to even the tiniest resistance in the earth circuit.
Kees Oudesluijs


Op 5-11-2017 om 1:25 schreef Fred Wescoe:
>
> I am stumped.  I ordered 1157 replacement LED bulbs and flasher from 
> Super Bright.  I changed out the turn signal bulbs on my BJ8 today and 
> have a problem I cannot figure out.
> Before I started, I checked that everything was working properly, turn 
> signals, brake lights and running lights.  All the way around, right, 
> left and running lights were in order.
> I replaced the 4 standard bulbs with the LED bulbs (1157 replacements) 
> and the flasher can with the replacement.  Running lights work 
> properly, left turn signal, front and rear work properly.  Then I 
> tried the right turn signal.  The right rear works properly but both 
> front lights blink in unison.  I rotated the front bulbs but no 
> change, both blink in unison when using the right turn signal.
> I removed the 4 replacement bulbs and flasher and reinstalled 
> everything as original.  Everything works properly.
> I reinstalled the LED bulbs and flasher and again, both front bulbs 
> blink with the right turn signal as before.
> I am stumped! What am I missing?
> As always, any help is appreciated!
>
> Fred
> 66BJ8
>
>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/coudesluijs@chello.nl
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20171105/979a26bf/attachment.html>