[Healeys] H4 carbs leaking
josef-eckert at t-online.de
josef-eckert at t-online.de
Wed May 17 14:32:30 MDT 2017
Cork seals need to be soaked in engine oil for at least one day before assembly.
Then all should be tight.
Josef Eckert
KonigswinteR/Germany
-----Original-Nachricht-----
Betreff: [Healeys] H4 carbs leaking
Datum: 2017-05-17T22:28:06+0200
Von: "ggilliam at usol.com" <ggilliam at usol.com>
An: "Healeys" <healeys at autox.team.net>
Experts...
I have rebuilt the carbs on my BN4, genuine SU master kit. New shafts,
butterflys, all the seals and gaskets, etc. The engine starts easy,
idles down better than ever before, but both carbs leak badly down the
jet tube. I had hoped the seals would "set in" or something like that
after some cycles of the choke levers, but no, still a significant
dripping, directly over the exhaust of course.
Does anyone have a secret method of installing new seals on the jet
tubes, lubricants, order of assembly, additional quantities?
Thanks for all suggestions..
Gordy
Longbridge BN4
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys
Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/josef-eckert@t-online.de
More information about the Healeys
mailing list