[Healeys] Pump 'Cover'

[Oudesluys]

It also helps to mount the bracket on rubber isolator blocks.
Kees Oudesluijs

Op 10-3-2017 om 9:40 schreef Oudesluys:
> That is correct, although it will not help much. The sleeve is the 
> most important item for that purpose and can be made up from scrap 
> materials easily enough, which also allows some experimenting.
> Kees Oudesluijs
>
>
> Op 10-3-2017 om 5:43 schreef Bob Spidell:
>> OK gurus, what's the purpose of this, and which cars (#72)?
>>
>> http://www.mossmotors.com/Shop/ViewProducts.aspx?PlateIndexID=28868&SortOrder=430 
>>
>>
>> I bought one, hoping it'll muffle the sound and vibration of the pump 
>> bolted to the rear bulkhead of my BN2; is this it's purpose in life?
>>
>> TIA,
>>
>> Bob
>>
>> _______________________________________________
>> Support Team.Net http://www.team.net/donate.html
>> Suggested annual donation  $12.75
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>>
>> Healeys at autox.team.net
>> http://autox.team.net/mailman/listinfo/healeys
>>
>> Unsubscribe/Manage: 
>> http://autox.team.net/mailman/options/healeys/coudesluijs@chello.nl
>>
>>
>>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/healeys/coudesluijs@chello.nl
>
>
>