[Healeys] Toyota 5 speed

[John Rowe]

Ed, I have done the clutch conversion. Any good machine shop can redrill the
new holes n the correct spot.

John Rowe

Qld Australia

 

From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Ed O'Neal
Sent: Saturday, 1 July 2017 1:21 AM
To: healeys at autox.team.net
Subject: [Healeys] Toyota 5 speed

 

Gents,

 

I'm going to do the Toyota 5 speed conversion on my 1960 BT7.  Apparently, I
will need a BJ8 flywheel.  Can the old BT7 flywheel be successfully
re-machined to accept the BJ8 clutch plate?  If so are there any
instructions for this modification?

 

Ed O'Neal

 

ed at wadsworthoneal.com

 

Edward J. O'Neal, P.E., Pte.

Wadsworth O'Neal Associates, Inc.

6418 Commerce Park Drive

Fort Myers, Florida  33966

phone:  (239) 245-8728

cell:        (239) 410-6174

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20170701/3b0a16c1/attachment.html>