[Healeys] overdrive part
Ed at wadsworthoneal.com
Sun Jun 25 14:41:26 MDT 2017
Also a worm drive hose clam work well to hold the rollers in place. And if you loosen th4e clamp slightly, you can slide the whole assembly into the housing without scattering the little buggers all over the place.
From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Laurie Wilford
Sent: Friday, June 23, 2017 8:35 PM
To: ruvino at ripnet.com; healeylist
Subject: Re: [Healeys] overdrive part
I happen to have one handy. It is 1/8" thick, 0.125
A rubber band works well to keep the rollers in the unidirectional clutch :)
Sent from my Galaxy Tab(r) A
-------- Original message --------
From: ruvino at ripnet.com<mailto:ruvino at ripnet.com>
Date: 2017-06-23 5:55 PM (GMT-05:00)
To: healeylist <healeys at autox.team.net<mailto:healeys at autox.team.net>>
Subject: [Healeys] overdrive part
Can anyone tell me the thickness of the bronze thrust washer, clutch to annulus, Moss part number 866-620?
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Healeys