[Healeys] Front leather seat installation

[Richard Collins]

I am redoing the seats on my BN7 with a Moss kit. The old original bottom pleats were full as Steve notes below but the new kits are not.
Neither are leather.

Regards,
Richard C


On Jul 27, 2017, at 6:53 PM, BJ8Healeys <sbyers at ec.rr.com<mailto:sbyers at ec.rr.com>> wrote:

It has been a long time, but as I recall the pleats in the seat bottom were pre-sewn and filled out when I installed the cover, but have flattened out over the last 18 years of carrying my butt around.  I may be wrong.  The pleats in the rear seat pans are still full.

Steve Byers
HBJ8L/36666
BJ8 Registry
AHCA Delegate at Large
Havelock, NC


From: Tim Davis BN7 [mailto:tld6008 at mchsi.com]
Sent: Thursday, July 27, 2017 6:39 PM
To: BJ8Healeys
Cc: 'Healey List'
Subject: Re: [Healeys] Front leather seat installation

I did mine much as you did. I do recall gluing Muslin material to certain areas and using a plastic dry cleaning  bag to help get the covers onto the seat back (pulled free afterwards). What I didn't know and it looks like you may not have either is the trick to get the pleats in the leather covers to fill out. Some of the old seats I have taken apart had padding (looked like cotten batting) stuffed in places to fill out areas for a better contour.

Tim Davis BN7
_______________________________________________
Support Team.Net<http://team.net> http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

Healeys at autox.team.net<mailto:Healeys at autox.team.net>
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/gonnagitcha90@hotmail.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20170728/57d8e485/attachment.html>