[Healeys] Front leather seat installation

Bob Spidell bspidell at comcast.net
Thu Jul 27 08:56:12 MDT 2017


Weldwood is the best, IMO (and my upholsterer's opinion):

https://www.ebay.com/i/282523944709?chn=ps&dispItem=1

But, for just a couple seats, this should be enough:

https://www.amazon.com/3M-08090-Super-Yellow-Adhesive/dp/B0002JMPRK

Neither will damage the foam.

Bob


On 7/27/2017 6:24 AM, Stephen Hutchings wrote:
> I won't get around to this before the car comes off the road for the 
> winter, but I've got the leather pieces for my front seats (BJ8), and 
> I'm gathering all the advice and tips I can get ahead of time for the 
> installation. I've watched Matthew Randell's video, but the 100-6 
> seats are a bit different.
> I'd like to hear from those that have done this, particularly on what 
> to glue and what not to. I'm concerned that the foam backing on the 
> seat cushion part may not take well to contact cement.
> Anyway, I'd appreciate the benefit of your experience.
>
> Please don't reply that I should hire a pro, because I've already made 
> that decision based on what I've been able to do so far.
> Thanks,
> Stephen, BJ8
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20170727/872b22b1/attachment.html>


More information about the Healeys mailing list