[Healeys] Shroud Repair.

[Patrick & Caroline Quinn]

Hello

 

If it was plastic based filler it was not applied by the Jensen factory as they only used lead.

 

Hoo Roo

 

Patrick Quinn

Blue Mountains, Australia

 

From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Mike Tobin
Sent: Saturday, 8 July 2017 8:29 AM
To: healeys at autox.team.net
Subject: [Healeys] Shroud Repair.

 

I've got  a couple-inch gap on the rear shroud at the flange bend.  What's the best way to deal with it? I'd rather do it myself - just because that's how I'm approaching the restoration.

I've got  MIG welder and I closed a couple small tears in the front shroud  with it.  I also fill a small hole by using a copper spoon behind the hole.  When I was done grinding ithe fixes came out OK. I'm hesitating to use the spoon on a hole this size. The metal is also pretty thin there from corrosian. I could use fiberglass, I suppose, , but I'd rather not.

 

 

I've been surprised by the amount of factory-applied filler I've uncovered on both shrouds.  At first I thought I thought it was damage repair with the first owner, but then I noticed that the reverse sides of the shrouds showed no sign of trauma - the filler was used not to fill but to shape the contour..



 

Cheers and Thanks Again,

Mike Tobin

Townsend, Montana

 

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20170708/06f3d600/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 30595 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20170708/06f3d600/attachment.jpg>