[Healeys] Vernier timing gears

[John Rowe]

It allows you to get the cam timing correct when assembling. After that it
is no different to normal timing wheel
John Rowe
Qld Ausralia

-----Original Message-----
From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of David
Porter
Sent: Saturday, 8 July 2017 12:39 AM
To: healeys at autox.team.net
Subject: Re: [Healeys] Vernier timing gears

...assuming that the gears and chain and tensioner are up to snuff, exactly
what is the big benefit for vernier adjuster when there is a single cam
acting on the valves.. dp


On 7/7/2017 4:05 AM, Chris Dimmock wrote:
> Hi Wayne,
> >From a quick internet search on the head markings of your "aviation
bolts" they are at best approx grade 5 (120 KSI) equivalent, cad plated
steel bolts. Nothing special. 
> The Rollmaster bolts you have shown look to me like grade 8 (150 KSI)
unbrako style cap head bolts.
> The Rollmaster Vernier timing kit tells you at least 3 times (on the
packaging, and in the instructions) to Locktite these bolts.
> If I was going to change these bolts, I'd go up to 180 KSI ARP bolts, not
down to grade 5 120 KSI bolts.
> Our Healey Club (AHOC NSW) sells the  Rollmaster Vernier kits and we have
had no issues reported.
> Bob Spidell has recently had this timing set installed in his newly
rebuilt engine.
> Best
> Chris
>
>
>
> Sent from my iPhone
>> On 6 Jul. 2017, at 1:43 am, Wayne <waschu2 at gmail.com> wrote:
>>
>> Hello,
>>
>>           I am getting back to my Healey 3000 engine rebuild after two
years.  I bought the Roller master vernier timing gear set from Moss at that
time.  I have previously used the Roller Master gear set with multiple key
ways to adjust the cam timing with no problems on other rebuilds. What I
don't like about this set is that the cap screws used to clamp the vernier
gear to the hub are not very robust. Working in aviation I have AN-4 bolts
that I can replace the cap screws with and safety wire them to prevent
slippage.  Has anyone using this kit had problems?  I could keep the cap
screws and Loctite them. This is a street car, not a race car. Pictures are
one bolt installed and the hardware side by side.
>>
>> Wayne
>>
>>
>> <IMG_2537.jpg>
>> <IMG_2540.jpg>
>> _______________________________________________
>> Support Team.Net http://www.team.net/donate.html Suggested annual 
>> donation  $12.75
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>>
>> Healeys at autox.team.net
>> http://autox.team.net/mailman/listinfo/healeys
>>
>> Unsubscribe/Manage: 
>> http://autox.team.net/mailman/options/healeys/austin.healey@gmail.com
>>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html Suggested annual 
> donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/healeys/frogeye@porterscustom.co
> m
>
>
>

--
Dave Porter Porter Custom Bicycles 2909 Arno St. NE Albuquerque, NM
87107 505-352-1378 Go HERE: my world www.porterbikes.com/
_______________________________________________
Support Team.Net http://www.team.net/donate.html Suggested annual donation
$12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/john@jtkarowe.com.au