[Healeys] Belleville washers in BN2 steering box

Fri Jan 13 15:16:09 MST 2017

I presume considerable import tax will be added very soon for all non 
American products.

-----Original-Nachricht-----
Betreff: Re: [Healeys] Belleville washers in BN2 steering box
Datum: 2017-01-13T23:07:04+0100
Von: "i erbs" <eyera3000 at gmail.com>
An: "Neil Anderson" <neilandcustom at gmail.com>

I wanted to buy a luggage rack from England, They wanted 248 BPS for the 
rack and 125 BPS to ship. I told them to find a cheaper way to ship or I 
would not buy the rack. They told me too bad that was what it cost to ship. 
Other suppliers have been willing to find a cheaper way to ship when I 
asked...
But no VAT applied :)

Ira Erbs
Portland,OR
      _______                                  _______
     (______ \____1959 BN4____/ _______)
         (_________________________)
          BT7 engine and disk brakes

A racing car is an animal with a thousand adjustments. Mario Andretti
Please excuse random auto corrects and misspelled words

On Fri, Jan 13, 2017 at 7:27 AM, Neil Anderson <neilandcustom at gmail.com
<mailto:neilandcustom at gmail.com> > wrote:
  Bob,

  FWIW, there would be no VAT on export orders from the UK, but shipping is
  getting really expensive.

  Neil Anderson
  BT7

  On Thu, Jan 12, 2017 at 11:04 AM, Bob Spidell <bspidell at comcast.net
  <mailto:bspidell at comcast.net> > wrote:
    Well, I went ahead and ordered from Moss.  I did a cursory check of the
    interwebs didn't turn up anything of those dimensions here:
    https://www.mcmaster.com/#standard-washers/=15uvd84
    <https://www.mcmaster.com/#standard-washers/=15uvd84>
    and here:
    http://www.keybellevilles.com/bellevilles/sampleCatalog.php?
    gclid=CMCHjPHOuNECFQGRfgodVAoFuA
    <http://www.keybellevilles.com/bellevilles/sampleCatalog.php?gclid=CMCHjPHOuNECFQGRfgodVAoFuA>
    and others, and I need to get this car back together before I start
    losing the little bits.   FWIW, SC Parts and AH Spares have them at a
    more reasonable price--esp. with the current exchange rate--but with
    VAT and shipping it's not a massive savings.
    My thanks to Olin, Bob and others who responded; if I come across these
    in this size I'll make a note for future reference.  Now, at least, I
    know what they're for and how to stack them.
    Bob

    On 1/10/2017 2:14 PM, Olin Brimberry wrote:

        Bob, I figured height of the spring was also important, so I put 2 together and measured the height with calipers Height of 2 washers: 0.100 inches Height of 1 washer: 0.050 inches Thickness of washer: 0.025 inches Checking the previous diameter dimensions with a caliper, I get: ID: 1.057 inches OD: 1.5 inches I suspect that the ID is originally spec'd to be 1-1/16" but because of the slight "spring", the diameter is slightly less. Good luck Olin K. Brimberry, PE Principal Engineer obrimberry at hunterbane.com
        <mailto:obrimberry at hunterbane.com> Office - 919.803.4274 Mobile - 919.522.1608 HunterBane Engineering, PLLC PO Box 10314 Raleigh, NC 27605 3306 Alamance Drive Raleigh, NC 27609 -----Original Message----- From: Olin Brimberry [mailto:obrimberry at hunterbane.com
        <mailto:obrimberry at hunterbane.com>] Sent: Tuesday, January 10, 2017 4:34 PM To: 'Bob Spidell' <bspidell at comcast.net>
        <mailto:bspidell at comcast.net>; 'Healeys' <healeys at autox.team.net>
        <mailto:healeys at autox.team.net> Subject: RE: [Healeys] Belleville washers in BN2 steering box I just pulled mine out of a steering box I am rebuilding, and yes there are 6 positioned as such: ()()() Where only the outer edges touch. The dimensions are as follows: ID: 1-1/16 OD: 1-1/2 Pictures of the measurements are attached for verification purposes. The washers were loose on the shaft, but I think the closer tolerance is going to be on the OD side. Olin K. Brimberry, PE Principal Engineer obrimberry at hunterbane.com
        <mailto:obrimberry at hunterbane.com> Office - 919.803.4274 Mobile - 919.522.1608 HunterBane Engineering, PLLC PO Box 10314 Raleigh, NC 27605 3306 Alamance Drive Raleigh, NC 27609 

    _______________________________________________
    Support Team.Net http://www.team.net/donate.html
    <http://www.team.net/donate.html>
    Suggested annual donation  $12.75
    Archive: http://www.team.net/archive <http://www.team.net/archive>
    Forums: http://www.team.net/forums <http://www.team.net/forums>

    Healeys at autox.team.net <mailto:Healeys at autox.team.net>
    http://autox.team.net/mailman/listinfo/healeys
    <http://autox.team.net/mailman/listinfo/healeys>

    Unsubscribe/Manage: http://autox.team.net/mailman/
    options/healeys/neilandcustom at gmail.com
    <http://autox.team.net/mailman/options/healeys/neilandcustom@gmail.com>

  _______________________________________________
  Support Team.Net http://www.team.net/donate.html
  <http://www.team.net/donate.html>
  Suggested annual donation  $12.75
  Archive: http://www.team.net/archive <http://www.team.net/archive>
  Forums: http://www.team.net/forums <http://www.team.net/forums>

  Healeys at autox.team.net <mailto:Healeys at autox.team.net>
  http://autox.team.net/mailman/listinfo/healeys
  <http://autox.team.net/mailman/listinfo/healeys>

  Unsubscribe/Manage: http://autox.team.net/mailman/
  options/healeys/eyera3000 at gmail.com
  <http://autox.team.net/mailman/options/healeys/eyera3000@gmail.com>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20170113/0aee1311/attachment.html>