[Healeys] Belleville washers in BN2 steering box

[David Porter]

http://www.bokers.com/washers.asp?gclid=CjwKEAiAkuLDBRCRguCgvITww0YSJAAHrpf-bGE1LEP4rw6GNnk--UMElG2XTfvvzeDD4TOZDFPI6RoC0Jfw_wcB

Just so you all know...


On 1/13/2017 9:03 AM, Oudesluys wrote:
> Not for a few washers popped in a sturdy envelope as regular 
> unregistered mail!
> Kees Oudesluijs
>
>
> Op 13-1-2017 om 16:27 schreef Neil Anderson:
>> Bob,
>>
>> FWIW, there would be no VAT on export orders from the UK, but 
>> shipping is getting really expensive.
>>
>> Neil Anderson
>> BT7
>>
>> On Thu, Jan 12, 2017 at 11:04 AM, Bob Spidell <bspidell at comcast.net 
>> <mailto:bspidell at comcast.net>> wrote:
>>
>>     Well, I went ahead and ordered from Moss.  I did a cursory check
>>     of the interwebs didn't turn up anything of those dimensions here:
>>
>>     https://www.mcmaster.com/#standard-washers/=15uvd84
>>     <https://www.mcmaster.com/#standard-washers/=15uvd84>
>>
>>     and here:
>>
>>     http://www.keybellevilles.com/bellevilles/sampleCatalog.php?gclid=CMCHjPHOuNECFQGRfgodVAoFuA
>>     <http://www.keybellevilles.com/bellevilles/sampleCatalog.php?gclid=CMCHjPHOuNECFQGRfgodVAoFuA>
>>
>>     and others, and I need to get this car back together before I
>>     start losing the little bits.   FWIW, SC Parts and AH Spares have
>>     them at a more reasonable price--esp. with the current exchange
>>     rate--but with VAT and shipping it's not a massive savings.
>>
>>     My thanks to Olin, Bob and others who responded; if I come across
>>     these in this size I'll make a note for future reference.  Now,
>>     at least, I know what they're for and how to stack them.
>>
>>     Bob
>>
>>
>>     On 1/10/2017 2:14 PM, Olin Brimberry wrote:
>>>     Bob,
>>>
>>>     I figured height of the spring was also important, so I put 2 together and measured the height with calipers
>>>     Height of 2 washers: 0.100 inches
>>>     Height of 1 washer: 0.050 inches
>>>     Thickness of washer: 0.025 inches
>>>     Checking the previous diameter dimensions with a caliper, I get:
>>>       
>>>     ID: 1.057 inches
>>>     OD: 1.5 inches
>>>
>>>     I suspect that the ID is originally spec'd to be 1-1/16" but because of the slight "spring", the diameter is slightly less.  Good luck
>>>
>>>     Olin K. Brimberry, PE
>>>     Principal Engineer
>>>     obrimberry at hunterbane.com <mailto:obrimberry at hunterbane.com>
>>>     Office -919.803.4274 <tel:%28919%29%20803-4274>
>>>     Mobile -919.522.1608 <tel:%28919%29%20522-1608>
>>>
>>>     HunterBane Engineering, PLLC
>>>     PO Box 10314
>>>     Raleigh, NC 27605
>>>     3306 Alamance Drive
>>>     Raleigh, NC 27609
>>>
>>>
>>>
>>>     -----Original Message-----
>>>     From: Olin Brimberry [mailto:obrimberry at hunterbane.com <mailto:obrimberry at hunterbane.com>]
>>>     Sent: Tuesday, January 10, 2017 4:34 PM
>>>     To: 'Bob Spidell'<bspidell at comcast.net> <mailto:bspidell at comcast.net>; 'Healeys'<healeys at autox.team.net> <mailto:healeys at autox.team.net>
>>>     Subject: RE: [Healeys] Belleville washers in BN2 steering box
>>>
>>>     I just pulled mine out of a steering box I am rebuilding, and yes there are 6 positioned as such: ()()() Where only the outer edges touch.  The dimensions are as follows:
>>>
>>>     ID: 1-1/16
>>>     OD: 1-1/2
>>>     Pictures of the measurements are attached for verification purposes.
>>>
>>>     The washers were loose on the shaft, but I think the closer tolerance is going to be on the OD side.
>>>
>>>     Olin K. Brimberry, PE
>>>     Principal Engineer
>>>     obrimberry at hunterbane.com <mailto:obrimberry at hunterbane.com>
>>>     Office -919.803.4274 <tel:%28919%29%20803-4274>
>>>     Mobile -919.522.1608 <tel:%28919%29%20522-1608>
>>>
>>>     HunterBane Engineering, PLLC
>>>     PO Box 10314
>>>     Raleigh, NC 27605
>>>     3306 Alamance Drive
>>>     Raleigh, NC 27609
>>>
>>>
>>>
>>     _______________________________________________ Support Team.Net
>>     http://www.team.net/donate.html <http://www.team.net/donate.html>
>>     Suggested annual donation  $12.75 Archive:
>>     http://www.team.net/archive Forums: http://www.team.net/forums
>>     Healeys at autox.team.net <mailto:Healeys at autox.team.net>
>>     http://autox.team.net/mailman/listinfo/healeys
>>     <http://autox.team.net/mailman/listinfo/healeys>
>>     Unsubscribe/Manage:
>>     http://autox.team.net/mailman/options/healeys/neilandcustom@gmail.com
>>     <http://autox.team.net/mailman/options/healeys/neilandcustom@gmail.com>
>>
>>
>> _______________________________________________
>> Support Team.Nethttp://www.team.net/donate.html
>> Suggested annual donation  $12.75
>> Archive:http://www.team.net/archive
>> Forums:http://www.team.net/forums
>>
>> Healeys at autox.team.net
>> http://autox.team.net/mailman/listinfo/healeys
>>
>> Unsubscribe/Manage:http://autox.team.net/mailman/options/healeys/coudesluijs@chello.nl
>>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/frogeye@porterscustom.com
>
-- Dave Porter Porter Custom Bicycles 2909 Arno St. NE Albuquerque, NM 
87107 505-352-1378 Go HERE: my world www.porterbikes.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20170113/668e9f81/attachment.html>