[Healeys] condencer

[josef-eckert at t-online.de]

Perhaps this condenser was a temporary fit after fail of the normal 
condenser fitted in the distributor.
When the condenser in the distributor is changed to a good one you can take 
the external off. It also could be it was fitted as a failsafe in case the 
original in the distributor fails and you want a fast repair. Wire of the 
external condenser is to be fixed to the terminal of the coil where the 
white/black cable goes, only  in case the dizi-condenser fails.
 
Josef eckert
Konigswinter/Germany
 
 
 
-----Original-Nachricht-----
Betreff: Re: [Healeys] condencer
Datum: 2017-01-10T07:57:49+0100
Von: "gablegerry at netscape.net" <gablegerry at netscape.net>
An: "healey at autox.team.net" <healey at autox.team.net>
 
 
 
My BN6 came with a condenser on top of the coil but not attached to 
anything.  Any idea where this condenser is to be reinstalled and what 
condenser should I replace it with.
Thanks 

 


   



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20170110/24c5ec45/attachment.html>