[Healeys] Carb Adjustment Help Requested - BJ8 MkIII

[Bob England]

Hello all, and thanks again for everyone's insight on my issue.

In answer to the questions put to me over the last little while:

     Needles are standard UH at 0.125" base dia.

     The needles do show signs of slight rubbing in the 3/4" closest to the
base (i.e. most common throttle settings).

     Jet sits about 1.6mm below the throttle bridge at its maximum height.

     Gas level in jets - tough to tell, but below the level of the top of
the jet when jet is pulled down all the way.

Thanks again.

BobE