[Healeys] knock off hammer

[John Spaur]

Properly installed knockoffs tighten when the car is driven forward. It not
money, dead blow hammers cost around $30 too. I have a knockoff hammer but I
am trying to find one that will actually work to loosen the knockoff after
the car has been driven for 6000 miles or so.

-----Original Message-----
From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Frank
Magnusson
Sent: Sunday, August 13, 2017 11:57 AM
To: healeys at autox.team.net
Subject: Re: [Healeys] knock off hammer

Rubber mallet?  Not a chance.  Get a purpose made knockoff hammer.  They are
readily available and not expensive.  There is no substitute for the right
tool.  

Its really not a question of getting the knockoffs off; more important to
get them ON tight enough.  If one gets loose and works its way off, youll
lose a wheel, likely have an accident, wreck the car or worse.  All for a
$30 knock off hammer.

Sent from my iPad
_______________________________________________
Support Team.Net http://www.team.net/donate.html Suggested annual donation
$12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/jmsdarch@sbcglobal.net