[Healeys] Rear end pinion shims

[John Vrugtman]

Bokers.com

On 4/29/2017 8:23 AM, Wayne wrote:
> Hello,
>
>                 I am building a couple of Healey rear ends and need a 
> selection of pinion shims.  They are 1 1/2 in OD  by 1 1/8 ID 
> Inches.   Moss has a very limited selection and I was hoping someone 
> had found an American cars application that fits. I believe 28 mm 38mm 
> shims would work also.  A kit with several thickness shims would be 
> great.
>
>
>                                         Thanks
>
>                                           Wayne
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/healeys/javrugtman@htcnet.org
>
>
>