[Healeys] BJ8---Speedometer disassembly

[HealeyRick]

I cut a "V" shape into a piece of cardboard and slip the cardboard under
the needle so the needle is at the point of the V. This will protect the
gauge face. Then take a kitchen fork and slip the tines under the needle
center and lift up.  If it doesn't come up just by lifting, you can gently
lever against the gauge face.

Rick Neville

On Fri, Apr 14, 2017 at 2:11 AM, John Spaur <jmsdarch at sbcglobal.net> wrote:

> You have to pull it straight off. Not for the faint of heart.
>
> John
>
> -----Original Message-----
> From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Tom
> Felts
> Sent: Thursday, April 13, 2017 3:56 PM
> To: healeys at autox.team.net
> Subject: [Healeys] BJ8---Speedometer disassembly
>
> I need to pull the guts out of my speedo.  Have removed (screws, etc and
> the
> push-counter end)  Trying to get the face off it appears you need to remove
> the needle.  How do you remove the needle (do you pry it off)---this will
> allow removal of the face so you can get the guts out.
>
> thanks
> tom
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html Suggested annual donation
> $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/jmsdarch@sbcglobal.net
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/
> options/healeys/healeyrik at gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20170414/43947804/attachment.html>