[Healeys] nitrus oxide?

[Richard Kahn]

I was trying to remove one of the nut from the hub. It so;m;e how got fused. I finally got the hub off with a Dremel  and a hardened steel cutting tool. I now have to clean up the flange on the hub. the nitrus oxide was not necessary.


________________________________
From: David Nock <healeydoc at gmail.com>
Sent: Friday, September 30, 2016 11:00 AM
To: John Spaur; 'Richard Kahn'; healeys at autox.team.net
Subject: Re: [Healeys] nitrus oxide?

There should be no reason to go to that extent to remove that stud. A simple punch and hammer to remove it.
Did you remove the hub,


David Nock
healeydoc at sbcglobal.net
209 948 8767
www.britishcarspecialists.com

From: John Spaur<mailto:jmsdarch at sbcglobal.net>
Sent: Thursday, September 29, 2016 8:41 PM
To: 'Richard Kahn'<mailto:tahoehealey at hotmail.com> ; healeys at autox.team.net<mailto:healeys at autox.team.net>
Subject: Re: [Healeys] nitrus oxide?


Google whipped cream maker.



From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Richard Kahn
Sent: Thursday, September 29, 2016 9:59 AM
To: healeys at autox.team.net
Subject: [Healeys] nitrus oxide?



I need to "freeze" a stud to remove it. I understand that it can be done with nitrus oxide and I'm not sure where a small quantity of it can be obtained (like a spray paint can size).  Dry ice is too difficult to use as it needs to be applied in the vertical position. Any one have any thoughts?

Rich Kahn

________________________________
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/healeydoc@gmail.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20160930/c3db25de/attachment.html>