[Healeys] Helicoils in SU carbs

[i erbs]

Lin, You raise a great question.
 Why not just cut threads into the casting? Couldn't one use a tap to cut
threads? It would be a brilliant solution to a complete PITA situation.

Ira Erbs
Portland,OR
      _______                                  _______
     (______ \____1959 BN4____/ _______)
         (_________________________)
          BT7 engine and disk brakes

Please excuse random auto corrects and misspelled words

On Fri, Sep 23, 2016 at 3:50 AM, Linwood Rose <linwoodrose at mac.com> wrote:

> Who has used helicoils in their carb bodies so one doesn't have to put
> nuts on the back of the carbs when installing K&N or other air cleaners?
> Fiddling with the bolt head or nut from the back side of the carb is a
> pain. I believe I have read that some have used helicoils in the carb so
> solve this problem.
>
> What size helicoil is used? In my case I am using HD6 carbs if that
> matters.
>
> Thank you!
>
> Lin
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/
> options/healeys/eyera3000 at gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20160923/fbd61e88/attachment.html>