[Healeys] Cheese head screws

[Curtis Arndt]

Andy,

Sorry but those are not 10-32 screws on the carburetor dash pot screws.
They are 3/16" Whitworth.

Curt

On Sun, Oct 2, 2016 at 1:44 PM, Austin Healeys List <
austinhealeyslist at gmail.com> wrote:

> Hi Michael,
>
> HD8 carb float bowl/diaphragm is held on by four 1.5/8 long cheese
> head 10-32 screws
>
> WZX 1220
> Part 50 on http://sucarb.co.uk/carbspec/carburettor/spares/id/1584/
>
> Andy.
>
>
> On 10/3/16, Michael Salter <michaelsalter at gmail.com> wrote:
> > Slotted cheese head 10/32 screws were originally used in several places
> on
> > Healeys for securing such things as the overdrive solenoid, the shock
> > absorber cover plates, headlight adjuster screws etc.
> > I have searched extensively for such screws in any length and have been
> > unable to source them anywhere.
> > I realize that Fillister heads are readily available, and I have, in the
> > past, resorted to machining their heads flat  but I would very much
> prefer
> > to get the right heads if possible.
> > 53K2636 seems to be the most commonly used original part number.
> > Can anyone recommend a source..
> > Thanks.
> >
> > Michael S
> > BN1 #174
> >
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/
> options/healeys/cnaarndt at gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20161002/a8b64075/attachment.html>