[Healeys] Cheese head screws
michaelsalter at gmail.com
Sun Oct 2 09:38:17 MDT 2016
Unfortunately not, I have those but have to run a tap into each hole first
to make them fit.. Not ideal.
On Sun, Oct 2, 2016 at 11:14 AM, Bob Haskell <rchaskell at earthlink.net>
> 2 BA close enough?
> Or the screws from SU carbs and fuel pumps?
> Bob Haskell
> AHCA 3000 MkI registrar
> On 10/02/2016 09:44 AM, Michael Salter wrote:
>> Slotted cheese head 10/32 screws were originally used in several places
>> on Healeys for securing such things as the overdrive solenoid, the
>> shock absorber cover plates, headlight adjuster screws etc.
>> I have searched extensively for such screws in any length and have been
>> unable to source them anywhere.
>> I realize that Fillister heads are readily available, and I have, in the
>> past, resorted to machining their heads flat but I would very much
>> prefer to get the right heads if possible.
>> 53K2636 seems to be the most commonly used original part number.
>> Can anyone recommend a source..
>> Michael S
>> BN1 #174
>> Support Team.Net http://www.team.net/donate.html
>> Suggested annual donation $12.75
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Healeys at autox.team.net
>> Unsubscribe/Manage: http://autox.team.net/mailman/
>> options/healeys/rchaskell at earthlink.net
*If you can't fix it with a hammer, you've got an electrical problem.*
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Healeys