[Healeys] Replacing steering wheel on 100

[michael.salter at gmail.com]

Sorry hit send before finishing... 

Yep....that is pretty much what you have to do. 

It is possible to install the switch assembly onto the stator tube without pulling the tube out entirely but IMHO it really doesn't save a lot of work.

Michael S 

BN1 #174





On Wed, Nov 30, 2016 at 7:59 AM -0500, "Bob Spidell" <bspidell at comcast.net> wrote:










I'm dying to install my new Lempert wheel on my BN2.  As far as I can 
tell, this requires draining the steering box, undoing the olive, 
detaching the trafficator wires and pulling the stator tube all the way 
out.  Anybody know a better way?

Bob

_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com






-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20161130/99ff0a3d/attachment.html>