[Healeys] Shift Shaft Buffer

[Tim Davis BN7]

The guy who rebuilt my trans, gave me a piece of what liked like linoleum and instructed me to glue it in place. Said he had been using this for years.

----- Original Message -----
From: "Bob Spidell" <bspidell at comcast.net>
To: "Healeys" <healeys at autox.team.net>
Sent: Tuesday, November 29, 2016 6:09:16 PM
Subject: [Healeys] Shift Shaft Buffer

#2 on this page: 
http://www.mossmotors.com/Shop/ViewProducts.aspx?PlateIndexID=28881&SortOrder=40

Looks like this 'buffer' is to prevent the shifting shafts from hitting 
the backside of the bell housing.  This is missing on my BJ8's gearbox 
and is N/A.  Anyone know if this is necessary/good idea?  I'm thinking I 
can make one from some 1/8" rubber sheet, but would be worried about it 
bunching up and preventing movement of the shaft (I would glue the pad 
to the bellhousing).

TIA for any info anyone can provide.

Bob

_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/tld6008@mchsi.com