[Healeys] Side Curtain Bracket

Fri May 13 09:35:48 MDT 2016

Yeah Gary I noticed that too.  Moss says 2.  But I looked in an original parts manual it specifies 4.  None of the illustrations however show the front 2.  Wonder why.

Keith

On 05/13/16, warthodson at aol.com wrote:

Charlie,

The front side curtain bracket uses the same wing nut that is used to retain the rear side curtain bracket. Moss #805-110

Interestingly, I can find the wing nut in the Moss online catalog, but Moss says (2) are required. I think it should say (4) are required. Also, the wing nut is not shown with the side curtains in their online catalog. Only with the door accessories. 

Gary Hodson

-----Original Message-----

From: Charlie Schott <schottc at knology.net>

To: Chris Dimmock <austin.healey at gmail.com>

Cc: Steve B. Gerow <steveg at abrazosdata.com>; healeys <healeys at autox.team.net>

Sent: Thu, May 12, 2016 6:39 pm

Subject: Re: [Healeys] Side Curtain Bracket

The post of the front side curtain bracket on a BT7 is threaded. I can't see 

that it takes a nut, so why is it threaded? Or does it take a nut? Thanks.

Regards,

Charlie Schott

_______________________________________________

Support Team.Net http://www.team.net/donate.html

Suggested annual donation $12.75

Archive: http://www.team.net/archive

Forums: http://www.team.net/forums

Healeys at autox.team.net

http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/warthodson@aol.com

_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/llennep@verizon.net