[Healeys] Breather Assembly - rear axle.

[Oudesluys]

It seems the valve is missing: cap and steel ball. Some breathers have a 
light spring holding down the ball but this one is probably without.
Kees Oudesluijs


Op 30-3-2016 om 22:16 schreef Andy Sneddon:
>
> Folks,
>
>   According to the Parts book, the breather assembly on the rear axle 
> for my 1961 BT7, was part number 1G3668.  There is a note to say that 
> this was subsequently replaced by part number 1H3364.
>
> I am guessing that 1G3668 was an original metal breather assembly and 
> the later part 1H3364 was the plastic version which is freely 
> available today.
>
> Does any-one have a picture of the original breather assembly (1G3668).
>
> On the attached picture to the right of the new plastic version is (I 
> assume) what remains of the original version from my axle.  I would be 
> interested in understanding what bits are missing from an original 
> complete assembly – or is it just as simple as it is exactly the same 
> as the plastic version but in metal!
>
> Many thanks
>
> Andy
>
>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/coudesluijs@chello.nl
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20160331/90eebe31/attachment.html>