[Healeys] Rear leaf springs

[Bob Spidell]

Springs from Jule Enterprises have been recommended on the Forum: www.jule-enterprises.com 

NFI, no personal experience, etc. 

Bob 

----- Original Message -----

From: "Kimo Briske" <kimobriske at gmail.com> 
To: drmasucci at comcast.net, "healeys" <healeys at autox.team.net> 
Sent: Friday, March 18, 2016 10:19:43 AM 
Subject: Re: [Healeys] Rear leaf springs 

Hi, Your springs can be re arced, re bushed by a shop that does truck springs. Ask for the Teflon to be used between leaves. I had this done to my cars by Sacramento spring. Aloha, Kimo 

On Fri, Mar 18, 2016 at 12:40 AM, < drmasucci at comcast.net > wrote: 



Hi All, 

Thanks to those who responded to my question on a replacement U-bolt plate. 

What's the latest consensus on new rear springs for a phase-2 BJ8? I was going to reuse my old springs in my restoration, but when sitting on a flat surface the two springs are about 0.470" different in height. Are the Moss springs good quality? Is there more than one aftermarket manufacturer of replacements? 

Thanks very much, 

Dave 
64 BJ8 
72 XJ6 



_______________________________________________ 
Support Team.Net http://www.team.net/donate.html 
Suggested annual donation $12.75 
Archive: http://www.team.net/archive 
Forums: http://www.team.net/forums 

Healeys at autox.team.net 
http://autox.team.net/mailman/listinfo/healeys 

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/kimobriske@gmail.com 







_______________________________________________ 
Support Team.Net http://www.team.net/donate.html 
Suggested annual donation $12.75 
Archive: http://www.team.net/archive 
Forums: http://www.team.net/forums 

Healeys at autox.team.net 
http://autox.team.net/mailman/listinfo/healeys 

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/bspidell@comcast.net 


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20160318/ab21ebe2/attachment.html>