[Healeys] 6-36 screws
ATIGHTPROD at aol.com
ATIGHTPROD at aol.com
Wed Feb 10 13:13:57 MST 2016
Hey Bruce, check with Charlie Hart. He seems to have lots of different
screws, he even made some for the windshield of the 100. They fit flush with
windshield frame and work really well.
Steven
In a message dated 2/10/2016 11:28:43 A.M. Pacific Standard Time,
healeybruce at roadrunner.com writes:
Thanks for the comments so far. I don’t need the whole kit—just trying
to replace the existing screws which are a bit chewed up. I did get 4 from
British Car Specialists, but they are slotted head, and a tad too long. I
could cut them down, but without a nut to protect the threads, and no a die
to cut them, I would likely bugger them up grinding off a mm or so. The
slotted head also makes them very difficult to screw in.
As for size, they are definitely not 6-32, nor are they 6-40; the screws
will not thread into nuts of either those sizes. And they also not metric.
It is hard to get the thread gauge on such a short shaft, but capturing 4
or 5 threads they certainly appear to be 6-36. Hence, the quest. I’m not
sure if slotted or Phillips is correct for these either, but Phillips is
certainly easier to use and saver around the soft, painted frames.
Bruce Steele
Brea, CA
1960 BN7
From: Team.net [mailto:lawrence.swift at gmail.com]
Sent: Wednesday, February 10, 2016 10:19 AM
To: i erbs <eyera3000 at gmail.com>
Cc: Bruce Steele <healeybruce at roadrunner.com>; Ahealey help
<healeys at autox.team.net>
Subject: Re: [Healeys] 6-36 screws
I was not able to make the Moss kit fit on my BT7; thankfully, I saved the
old parts
On Feb 10, 2016, at 12:53 PM, i erbs <_eyera3000 at gmail.com_
(mailto:eyera3000 at gmail.com) > wrote:
Moss has a kit with screws and corner brackets
_9_
(http://www.mossmotors.com/Shop/ViewProducts.aspx?PlateIndexID=28953#top)
805-060
$33.99
BRACKET KIT, windshield frame
Note:
4 corner brackets & screws
Ira Erbs
Portland,OR
1959 BN4 100-6
with BT7 engine and disk brakes.
On Wed, Feb 10, 2016 at 8:52 AM, Bruce Steele
<_healeybruce at roadrunner.com_ (mailto:healeybruce at roadrunner.com) > wrote:
Anyone have a source for 6-36 x 3/16 screws that fit the corner brackets
in the windshields of the BN4/BN6/BN7/BT7 cars?
Bruce Steele
Brea, CA
1960 BN7
_______________________________________________
Support _Team.Net_ (http://team.net/) http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
_Healeys at autox.team.net_ (mailto:Healeys at autox.team.net)
http://autox.team.net/mailman/listinfo/healeys
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/eyera3000@gmail.com
_______________________________________________
Support _Team.Net_ (http://team.net/) http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
_Healeys at autox.team.net_ (mailto:Healeys at autox.team.net)
http://autox.team.net/mailman/listinfo/healeys
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/lawrence.swift@gmail.com
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/atightprod@aol.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20160210/0710f5c8/attachment.html>
More information about the Healeys
mailing list