[Healeys] Differential bearings

Al Fuller al at bighealey.org
Tue Feb 9 07:58:14 MST 2016


Mitch:
  
 Did you get the numbers for the bearings?  If you need, I have a spare diff you can look at.
  
   Al Fuller
al at bighealey.org

'65 A-H BJ-8
'85 Rx-7 GSL-SE

  

----------------------------------------
 From: "richard mayor" <boyracer466 at gmail.com>
Sent: Monday, February 08, 2016 8:31 PM
To: "mitch" <dayton21 at comcast.net>
Cc: "Healeys at autox.team.net" <Healeys at autox.team.net>
Subject: Re: [Healeys] Differential bearings   
 These bearings are very common sizes. Once the diff is apart you can read the numbers off the bearings and call your local bearing house. There are many manufacturers that make quality bearings.
   On Mon, Feb 8, 2016 at 2:34 PM, mitch <dayton21 at comcast.net> wrote:     

I am getting ready to install 3.54 gears in my diff  (1966 bj8)  

I want to use the BEST bearings avail. I guess TIMKEN....?  

Does anyone know the correct bearing ID#'s     for timkin or ?  

I want the carrier and pinion bearing numbers  

   

I know I can cross refer the orig.but it is not apart yet and I don't want any hold ups when I start  

   

Thanks  

Mitchell  

   

   

   

   

   

Sent from Mail for Windows 10  

.. 

_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/boyracer466@gmail.com

  


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20160209/fadedb89/attachment.html>


More information about the Healeys mailing list