[Healeys] GB Front Oil Seal

Bob Spidell bspidell at comcast.net
Mon Dec 26 08:57:06 MST 2016


It can (have mine out on the bench).  The only issue is extracting the 
old seal; there's not much of a gap between the first motion shaft and 
the bellhousing, but I did it on a BN2 which isn't significantly 
different in that regard.  I don't recall how we got the old one out, 
probably bent the tip of a cheap screwdriver to use as a puller.  Think 
you could run a couple self-tapping sheet metal screws in it for 
something to grab.  Just be careful not to scratch the shaft or the seal 
seat.

Bob


On 12/25/2016 7:11 PM, Roger Grace wrote:
> On a BJ8, could someone please confirm if the front transmission oil 
> seal can be replaced without separating the bell housing from the 
> transmission ?
> Looks to me as if it could be prised out  ?
> Tkx
> rg
>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/bspidell@comcast.net
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20161226/783f0347/attachment.html>


More information about the Healeys mailing list