[Healeys] BJ8 horn repare

Oudesluys coudesluijs at chello.nl
Fri Dec 16 11:57:17 MST 2016


Take the horn appart by marking the relative position of the parts and 
drilling out the 6 (I think) rivets that hold top, bottom and diaphragm 
together. Try to keep the gaskets in one piece. This will give you acces 
to the inside where you can replace the rivet with a new one or a small 
screw/bolt and nut.
If the gaskets were destroyed cut new ones from thin carton or thick 
peper an soak these first in anti rust wax. If the gaskets survived also 
soak them.
Fit the parts together using fitting screws and nuts or pop rivets. I 
prefer the screws and nuts as that really looks authentic.
Kees Oudesluijs




Op 14-12-2016 om 18:39 schreef ph:
>
> Hi,
>
> One of the 2 electrical sockets un-rivetted itself (rivet is broken).
>
> Anyone knows how I can repare that?
>
> Thanks,
>
> PH
>
>
>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/coudesluijs@chello.nl
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20161216/7784d41d/attachment.html>


More information about the Healeys mailing list