[Healeys] door latch

[Michael Salter]

Hi Stephen,
Thanks for the added information.
According to the parts, list the "link", being the bar that connects the
inside handle to the lock "latch", is attached to the lock with a rivet
part # 27H9833.
As I recall I have replaced that rivet with a 10/32 screw After tapping a
thread into the when installing new locks and it seems to work just fine.
Michael S
BN1 #174


On Mon, Dec 5, 2016 at 8:56 PM, Stephen Hutchings <s.hutchings at rogers.com>
wrote:

> Like some others recently, I've been having enough trouble with my
> driver's door latch that I've decided to replace it.
> The passenger door is fine and I can see where it's not as worn.
> However, I seem to remember that when I put it all together, the bit that
> goes forward to the inside handle was welded, or connected to the latch in
> a manner other than a fastener...whereas the part offered by the suppliers
> is just the door mounted latch.
> Anyone (before I get this apart and order my parts) remember how these
> parts are connected?
>
> Thanks,
> Stephen
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/
> options/healeys/michaelsalter at gmail.com
>
>
>


-- 
*If you can't fix it with a hammer, you've got an electrical problem.*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20161206/52af755a/attachment.html>