[Healeys] Installing soft top

[John Spaur]

Did it pull the chrome piece off of the glass? If so, the windshield might
be thinner glass than others or the rubber gasket may not be thick enough.
If it pulled the bow up the aluminum trim piece on the bow may not be over
the edge of the windshield enough to engage and grip it.

John
'62 BT7

-----Original Message-----
From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Charlie
Schott
Sent: Wednesday, April 13, 2016 5:35 PM
To: Chris Dimmock <austin.healey at gmail.com>
Cc: Steve B. Gerow <steveg at abrazosdata.com>; healeys at autox.team.net
Subject: Re: [Healeys] Installing soft top

I'm installing the soft top on my 1960 BT7. Before stretching the top to the
header board, I clamped the header board to the windshield, but it pulled up
in the center. If I stretch the top to it, it will pull away even further. 
Does anyone know what causes this and how can I fix it? Thanks.

Regards,

Charlie



_______________________________________________
Support Team.Net http://www.team.net/donate.html Suggested annual donation
$12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/jmsdarch@sbcglobal.net