[Healeys] Tires for 100-6
healeyrik at gmail.com
Sat Sep 26 18:49:40 MDT 2015
You found the correct link! Haven't used the dental drives myself, so I'd
contact Dayton with fitment questions,
On Sat, Sep 26, 2015 at 7:10 PM, Chris Scholz <drscholz at visioncenterpc.com>
> I think you sent the wrong link! How about these?
> Will the new hubs simply bolt right up and be at the correct spacing??
> Sent from my iPhone
> Chris Scholz OD
> On Sep 26, 2015, at 2:49 PM, HealeyRick <healeyrik at gmail.com> wrote:
> I might look at Dayton dental drives as the weak point is going to be on
> the splines:
> I like the look of the Cobra laced wheels as well for extra strength
> Rick Neville
> On Sat, Sep 26, 2015 at 3:27 PM, Chris Scholz <drscholz at visioncenterpc.com
> > wrote:
>> I am looking into buying new 72 spoke Dayton wire wheels for my '59 100-6
>> and will also get new tires at the same time.
>> Thinking about running staggered sizes --- I am making much more
>> horsepower than stock and was looking at using Vredestein 205/70HR15 for
>> the rear which are 26.3" in diameter and section width is 8.2".
>> Front tires could remain stock (165/15) which are 25.43" by Firestone or
>> Are 205 section tires too wide for Dayton rims? Coker says they are
>> fine. Believe 72 spoke Daytons are 6.5" wide.
>> Wondering how it will look with staggered sizes. Anybody else try this?
>> Sent from my iPhone
>> Chris Scholz OD
>> Support Team.Net http://www.team.net/donate.html
>> Suggested annual donation $12.75
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Healeys at autox.team.net
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Healeys