[Healeys] Stripped bolt
Bob Spidell
bspidell at comcast.net
Sun Oct 25 22:53:51 MDT 2015
WRT, the bolt not 'untightening;' are you unable to turn the bolt? Or
does it turn but not back out?
Doesn't sound good either way; if a thread chaser doesn't fix the
problem I'm afraid you'll probably need to install a helicoil (or
similar) when you do get the bad one out.
Bob
On 10/25/2015 9:18 PM, I Erbs wrote:
>
> Generator plate leaked after I last removed it. Cleaned Right Stuff
> off, used copper gasket sealer. When removing old bolts i realized the
> one above the leak spot was not fitting right. retightening bolts and
> replacing weird one went well. I hand tightened all bolts until firm.
> One upper bolt would not tighten and now it won't untighten either.
> Wanky one was a bottom bolt. Any suggestions for removing bad bolt?
> and clean up the threads ? Shit I'd just like to drive the bugger.
>
> Mr. Ira Erbs
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20151025/58b44e0a/attachment.html>
More information about the Healeys
mailing list