[Healeys] Toe measurements on BJ8

[Michael]

Hi Tom,
In my experience measuring toe with the suspension hanging is totally inaccurate.
You need to get the suspension to its normal ride position.
Michael S

-----Original Message-----
From: "Tom Felts" <tomfelts at windstream.net>
Sent: ‎19/‎10/‎2015 10:01 p.m.
To: "healeys at autox.team.net" <healeys at autox.team.net>
Subject: [Healeys] Toe measurements on BJ8

Using the old stick method I tried to measure toe differences between the front and rear of the front tires----while car was jacked up.

The rear ----measured same tread to same tread was a goof 1/2 to 5/8" wider than the front.  I believe there should be some positive difference between the two, but isn't this a bit much?

I have been getting uneven wear---on the outside of the tires and was wondering if this might be the reason.

Anyone have any thoughts you can share on this?

thanks
tom
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20151019/818b75d7/attachment.html>