[Healeys] Clutch fork

[richard mayor]

Not cast iron.  It is steel.

On Thu, Oct 8, 2015 at 8:46 AM, David Nock BCS <healeydoc at sbcglobal.net>
wrote:

> Braze up the holes in the pedals, then file smooth and you can then find
> the original position of the hole. The re drill the hole for the pedal.
>
> David Nock
> British Car Specialists
> 209-948-8767
> www.britishcarspecialists.com
>
> *From:* Tim Davis BN7 <tld6008 at mchsi.com>
> *Sent:* Thursday, October 08, 2015 8:28 AM
> *To:* Healey List <healeys at autox.team.net>
> *Subject:* [Healeys] Clutch fork
>
> Holes for pushrod connection are worn, need to weld and re-drill, is this
> cast iron?
>
> Tim Davis BN7
>
>
> ------------------------------
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/healeydoc@sbcglobal.net
>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/boyracer466@gmail.com
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20151008/b9fb6862/attachment.html>