[Healeys] Core plug extraction

[Charlie]

Michael, 

I do something similar, at least using a lag screw. My cheap slide hammer kit has a lag screw attachment, so I drill a hole for the screw and use the slide hammer to pop it out. 

Charlie 

----- Original Message -----

From: "Michael" <michael.salter at gmail.com> 
To: "Simon Lachlan" <simon.lachlan at homecall.co.uk>, "healeys" <healeys at autox.team.net> 
Sent: Friday, November 13, 2015 9:52:37 AM 
Subject: Re: [Healeys] Core plug extraction 

Not sure if a satisfactory solution has been found but I have found that the easiest way is to drill a hole in the middle then thread a long hardened lag screw through that hole. 
The end of the screw will eventually hit something and then the core plug will pop out of its seat. 
Michael S 
BN1 #174 

From: Simon Lachlan 
Sent: ‎12/‎11/‎2015 10:16 a.m. 
To: 'healeys' 
Subject: [Healeys] Core plug extraction 



I noted the other day what a ghastly job that is. Always possible and nearly always bl**dy awkward. 

I’ve seen clips of guys – always with the engine in pieces on the bench – who just bang one lip inwards until the plug swivels in the hole. Then they just grab it with a mole(?!) wrench or similar and hoik it out. So easy. 

I love my car dearly but I always expect the most cussed things of it and I’m seldom disappointed. Surely if I were to bang in those that I could reach, they’d just vanish inside, never to be seen again??? 

Simon 

_______________________________________________ 
Support Team.Net http://www.team.net/donate.html 
Suggested annual donation $12.75 
Archive: http://www.team.net/archive 
Forums: http://www.team.net/forums 

Healeys at autox.team.net 
http://autox.team.net/mailman/listinfo/healeys 

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/mgcharlie@comcast.net 


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20151113/2d3be198/attachment.html>