[Healeys] BN1 Front wirewheel hub studs

[Bob Spidell]

My first thought was 'wow, do you really want to remove much, if any, metal from a wheel stud?' But, if you're just gonna clean up some burrs on the threads you should be OK. 

http://britishfasteners.com/dies/bsf-dies.html 


----- Original Message -----

From: "Michael Salter" <michaelsalter at gmail.com> 
To: "STEPHEN CUSS" <stephen.j.cuss at btinternet.com> 
Cc: "healeys" <healeys at autox.team.net> 
Sent: Sunday, November 1, 2015 6:27:39 AM 
Subject: Re: [Healeys] BN1 Front wirewheel hub studs 

Hi Shephen, 
The brake drum studs are 7/16 x 18TPI threads. The thread type is British Standard Fine (B.S.F) 

Michael Salter 
BN1 #174 

On Sun, Nov 1, 2015 at 9:16 AM, STEPHEN CUSS < stephen.j.cuss at btinternet.com > wrote: 



Hi, 

Hoping someone can help me, I have an original BN1 100/4 built in 1954 some of the front wheel studs which hold the brake drum on look a little worn, so I was looking to buy a die and re-cut the threads, does anybody know what size and Teeth per Inch (TPI) these studs are? 

Thanks 
in advance for your help with this matter 

Stephen 






-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20151101/6f323709/attachment.html>