[Healeys] Looking for ideas

[HealeyRick]

If all else fails, Electric Discharge Machining (EDM) -
http://www.brokentap.com/services.html

Best of Luck,
Rick Neville

On Fri, Jun 26, 2015 at 5:52 AM, Michael Salter <michaelsalter at gmail.com>
wrote:

> Thanks to all for the good ideas some I have already tried without
> success....Looks like cutting and drilling is to be the order of the
> day..unfortunately those pins are case hardened which won't make things
> easier.
> If all else fails new brackets..
>
> Michael S
> BN1 #174
>
> On Thu, Jun 25, 2015 at 5:42 PM, Michael <michael.salter at gmail.com> wrote:
>
>> I left the seized shackle pins in both sides of this BN1 when it went off
>> to TechnoStrip in the hope that they would come loose.
>> They didn't so I've spent an inordinate amount of time trying to extract
>> them without wreaking the mounts on the frame.
>> Made a special puller, applied loss of heat, drilled right through each
>> bush, grumbled a lot but they will not move despite being subjected to
>> massive amount of force.
>> Any ideas...damaging the mounts in the chassis makes for a very tedious
>> repair.
>> Michael S.
>> BN1 #174
>>
>
>
>
> --
> *If you can't fix it with a hammer, you've got an electrical problem.*
>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/healeyrik@gmail.com
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20150626/c3abbf74/attachment.html>