[Healeys] Looking for ideas

[Michael]

I left the seized shackle pins in both sides of this BN1 when it went off to TechnoStrip in the hope that they would come loose.
They didn't so I've spent an inordinate amount of time trying to extract them without wreaking the mounts on the frame.
Made a special puller, applied loss of heat, drilled right through each bush, grumbled a lot but they will not move despite being subjected to massive amount of force.
Any ideas...damaging the mounts in the chassis makes for a very tedious repair.
Michael S.
BN1 #174
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20150625/f3004f17/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: WP_20150625_002.jpg
Type: image/jpeg
Size: 343201 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20150625/f3004f17/attachment.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: WP_20150625_003.jpg
Type: image/jpeg
Size: 335123 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20150625/f3004f17/attachment-0001.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: WP_20150625_004.jpg
Type: image/jpeg
Size: 366005 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20150625/f3004f17/attachment-0002.jpg>