[Healeys] Steering Box and Wire Wheel Questions--BJ8

[Michael Oritt]

Maybe he should just buy some more oil....

Best--Michael Oritt

On Sun, Jun 14, 2015 at 6:08 PM, Michael <michael.salter at gmail.com> wrote:

> Interesting...
> I have always found that the problem was attributable to corrosion on the
> rocker shaft where the seal seats.
> I solve this by using 2 CR seals each of which is 1/2 the thickness of the
> original.
> I'm a little confused as to how you get a steering box in a lathe???
> Michael S
> BN1 #174
> ------------------------------
> From: Per Schoerner <per at schoerner.se>
> Sent: ‎14/‎06/‎2015 5:45 p.m.
> To: healeys at autox.team.net
> Subject: Re: [Healeys] Steering Box and Wire Wheel Questions--BJ8
>
> Hi
> On the other hand, when you have done all this you will find that it
> didn't help, it will still leak. It's because of that oil seal that
> doesn't prevent oil leaks. Magnus Karlsson helped me to put a proper oil
> seal in the box, and that helps. It involves using the lathe and enlarge
> the oil seal seat, so a modern seal will fit.
> And while you're in there you should also replace the bush.
>
> Best, Per
>
> Michael skrev den 2015-06-14 23:15:
>
> > Bottom line for me is spend the time removing the box which will allow
> > you to do the seal replacement properly.
> >
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com
>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/michael.oritt@gmail.com
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20150614/c5d5a18d/attachment.html>