[Healeys] Is the List down? and question about power supplies for Eastwood plater

[Oudesluys]

What are D-cells? If they are 1,5V batteries you can use any 3V DC power 
supply or alternatively a power supply on which you can set Voltage and 
Amperage. They can be had dirt cheap second hand on places like ebay or 
new at radio shacks etc.
Kees Oudesluijs


John Vrugtman schreef op 2-6-2015 om 14:55:
> Caswell has one. 
> http://www.caswellplating.com/electroplating-anodizing/replenishment-chemicals.html
>
> On 5/29/2015 10:47 PM, sentenac.rw at gmail.com wrote:
>> Is the List down?  Has it been down for the past two days?  Or have I
>> been voted off the Healeys List island?
>>
>> I have an Eastwood plating kit that uses two D cells to provide the
>> power.  It works but it wears out batteries pretty fast.  I was
>> wondering if anyone had come up with a power supply that worked well
>> as a replacement.
>>
>> -Roland
>>
>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/healeys/coudesluijs@chello.nl
>
>
>
> -----
> Geen virus gevonden in dit bericht.
> Gecontroleerd door AVG - www.avg.com
> Versie: 2015.0.5941 / Virusdatabase: 4355/9923 - datum van uitgifte: 
> 06/02/15
>
>