[Healeys] BJ8 window fittings

[Stephen Hutchings]

I'm having trouble getting the fuzzy window interior seals at the top of the BJ8 door in the right place.The window was quite tight to the inside metal edge, but I've relieved that a bit. It looks to me like the seal strip should be laid along the inside top edge of the window opening, and clipped to that edge the way the chrome piece on the exterior is clipped.However, I'm concerned that the metal clip will rub the window, and I won't be able to get the fabric up against the glass.Or, does the metal strip go inside the window opening (between the glass and the metal door) and clip from there?
I've attached a crude drawing of the first version to try what I'm talking about.Thanks,Stephen, BJ8
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20150714/a1d66a53/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: fuzz seals112.jpg
Type: image/jpeg
Size: 41064 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20150714/a1d66a53/attachment.jpg>