[Healeys] Replacing brake master cylinder, fluid reservoir and flexible brake pipes - what order?

Richard Ewald richard.ewald at gmail.com
Mon Jul 13 06:48:29 MDT 2015


Bench bleed the master cylinder before installing it.  You will be glad you
did.
Rick

On Sun, Jul 12, 2015 at 11:44 AM, philip fish <philipfish at waitrose.com>
wrote:

> Hi All,
>
> This week I am going to replace the brake master cylinder, fluid reservoir
> and flexible brake pipes on my BT7. What is the best order to do these
> three steps?
>
> Reservoir, flexible brake pipes, master cylinder is the route I was going
> to take.
>
> Will I need to bench bleed the MC?
> Do I need to make any adjustments to the brakes before the bleeding step?
> Should I drain all the fluid out of the system before replacing the
> reservoir?
> Any advice welcome.
> Phil
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/richard.ewald@gmail.com
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20150713/1d0a6d06/attachment.html>


More information about the Healeys mailing list