[Healeys] engine and piston question

[Oudesluys]

I am very sorry for you, but one should always take 
measurements_**__*/firs/*__*t*_ before ordering pistons, shells, valves 
or any part that has to fit in or around any other part. You can only 
blame yourself on this.
Kees Oudesluijs
NL



Northside schreef op 9-1-2015 om 18:12:
> I am rebuilding my100-6 BN4. I ordered a set of pistons. When they 
> came in the mechanic showed me they were too small. I have reached the 
> conclusion that the engine must have been swapped out at some point. 
> The number on the block is 29f/1H 5487. Can anyone tell from this # 
> what the engine might be.
> Thanks for any help.
> Bud W
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/healeys/coudesluijs@chello.nl
>
>
>
> -----
> Geen virus gevonden in dit bericht.
> Gecontroleerd door AVG - www.avg.com
> Versie: 2015.0.5577 / Virusdatabase: 4257/8896 - datum van uitgifte: 
> 01/09/15
>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20150109/dce56337/attachment.html>