[Healeys] Packing Plate

rrengineer.mike rrengineer.mike at att.net
Sun Feb 8 20:19:41 MST 2015

My lock is installed without the packing piece or the rubber seal temporarily.  I can see now that I will probably need some thickness of packing piece after installing the seal. By the way, what kind of glue do you guys use for the rubber seal?
Mike MacLean

Sent via the Samsung GALAXY S® 5, an AT&T 4G LTE smartphone

-------- Original message --------
From: Bob Spidell <bspidell at comcast.net> 
Date:02/08/2015  18:50  (GMT-08:00) 
To: healeys at autox.team.net 
Subject: Re: [Healeys] Packing Plate 

Surprised someone hasn't fabbed a bunch of these and put them up for sale for $49.95 each.

Our BN2 didn't have one (or two); but with the new seal the lid sits a bit high anyway.


On 2/8/2015 5:46 PM, John Spaur wrote:
> I am not sure what the ones on a BN2 are like but the ones on my ’62 BT7 are mild steel. I have two, one that is 1/8” 
> thick and the other is 1/4” thick; both with slotted holes. They are used to adjust the height of the latch.
> John

Bob Spidell           San Jose, CA            bspidell at comcast.net


Support Team.Net http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

Healeys at autox.team.net

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/rrengineer.mike@att.net

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20150208/401d5545/attachment.html>

More information about the Healeys mailing list