[Healeys] Wiper blade assembly removal from arm

Al Fuller al at bighealey.org
Tue Dec 15 12:08:46 MST 2015

Hi Bruce:


I'm not home now to look at the car, but I seem to recall a little lever
under there to unlock the arm from the blade.


Al Fuller

al at bighealey dot org

'65 BJ-8

'85 Rx-7


From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Bruce
Sent: Saturday, December 5, 2015 8:05 PM
To: 'Healey' <Healeys at autox.team.net>
Subject: [Healeys] Wiper blade assembly removal from arm


OK, I'm stumped.  How do you remove the wiper blade assembly from the wiper
arm?  The blade assembly rotates about 90 degrees, but from there I cannot
figure out how to get it off the arm.  I don't want to bend the arm or
damage the spoon by tugging too hard or jamming stuff into the wrist joint.
Everything I read just says to remove the wiper from the arm.  What's the


Bruce Steele

Brea, CA

1960 BN7


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20151215/8cf34a35/attachment.html>

More information about the Healeys mailing list