[Healeys] Starter resistance
coudesluijs at chello.nl
Fri Apr 17 00:39:48 MDT 2015
Start checking your earth straps battery-chassis and engine-hassis. Look
for presence, corrosion, broken.
Than check integrety of all other leads to starter, clean and tighten
the battery terminals.
Seems to me there is a lack of use of the car (to much resistance in the
battery cut off switch).
John Spaur schreef op 17-4-2015 om 0:49:
> I am back to having starter motor issues.
> The starter turns over very slowly and will stop turning at all. I
> bypassed the battery cutoff switch because it was getting hot, which
> indicates too much resistance. Now when I turn over the starter, using
> the ignition switch, the cable from the solenoid to the starter motor
> gets hot at the connection to the starter motor. All connections are
> The battery is fully charged.
> What could be causing the cable to overheat? What should I check?
> Thank you,
> John Spaur
> ’62 BT7
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Healeys at autox.team.net
> Unsubscribe/Manage: http://firstname.lastname@example.org
> Geen virus gevonden in dit bericht.
> Gecontroleerd door AVG - www.avg.com <http://www.avg.com>
> Versie: 2015.0.5863 / Virusdatabase: 4331/9555 - datum van uitgifte:
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Healeys