[Healeys] US-made headers

[I Erbs]

I see that the Stock intake interfers with the Kirk headers. Anyone know if
the other headers will fit, or do I also need the after market intake? I
have a hotter cam, 40+ pistons and HD8s on my BT7 engine...

Ira Erbs
Portland, OR
   _______                                  _______
     (______ \____1960 BT7____/ _______)
         (_________________________)

On Mon, Sep 29, 2014 at 10:14 AM, Steve Gerow <steveg at abrazosdata.com>
wrote:

> Suggest calling Kirk - they do/used to make Healey headers:
>
> 205-608-1156
>
>
>
> I'm using their headers in conjunction with a DMD manifold. Installed both
> at the same time on my 29D stock engine. There was a noticeable seat-of-the
> pants improvement in acceleration.
>
>
>
> This was with the HD6s. I mounted HD8s later but can't say they made any
> difference with the stock cam.
>
>
>
> Pictures and installation sequence here:
>
> http://www.pbase.com/stevegerow/kirk_headers
>
>
>
> --
>
>
>
> Steve Gerow
>
> Altadena, CA, USA
>
> BN6
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/eyera3000@gmail.com