[Healeys] Rudd triples

Randy Dickson rdickson at midwestarchaeology.com
Thu Sep 4 15:17:51 MDT 2014


Simon,  That is exactly how mine are.  Original Healey tri carb manifolds
bored out to 1 3/4 for 3 HS6 carbs.  A friend had a Hardinge lathe and
wanted a challenge so he made a bracket to hold each manifold and then bored
them out to 1 3/4 on center.  Worked out great.
Randy
63 BJ7
60 BT7


-----Original Message-----
From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Wilko2
Sent: Thursday, September 04, 2014 3:25 PM
To: Simon Lachlan
Cc: healeys at autox.team.net
Subject: Re: [Healeys] Rudd triples

Here's the set that I have. 1 3/4" carbs.

http://tinyurl.com/qfvuz2g



On Sep 4, 2014, at 12:26 PM, Simon Lachlan wrote:

> They passed the reserve to sell at #1060:00 (Pounds)! I was tempted,
> but
not
> that tempted!!
>
> The 1.5in manifolds from the MKII can be eased out to 1.75in to take
> HD or HS6s. Thats what I did, with advice from Bill Bolton. (But they
> wont go
to
> 2in).
>
> Simon
> _______________________________________________


More information about the Healeys mailing list