[Healeys] 100-6 bn4 restoration

[John Spaur]

If they don't come out drill out the head or try and break them off. You can
use a vice grip to turn them out or grind them down. I presume you will be
installing new cover plates which need to be drilled for the screw and you
can drill a new hole in the chassis. Source new screws from a local fastener
supplier (Olander Company if there is one in our town
http://www.olander.com/). I was not happy with the Moss screws because the
head stripped easily. Be sure to find the correct sized screw driver (00 I
think) because it will be much easier.

John Spaur
'62 BT7